Copyright © All rights reserved. Designed & Maintained By Paul McDonald.
Our sister company is:
A small selection of Before and After repairs!
Paul McDonald & Son
We have recently invested in the latest state of the art alloy wheel
We have the capacity to straighten a 24” (607 mm) diameter wheel.
If we take the lathe of we can repair up to 30” diameter (762 mm).
We have 20 years wealth of experience in repairing alloy wheels.
All our staff are fully apprentice trained and have City and guilds & NVQ Qualifications.
We get a lot of wheels with cracks in them.
Below is a picture of a typical crack in a wheel.
This can be caused by a number of things, eg it could have driven down a pot hole.
Sometimes there are objects on the motorway that you can`t avoid.
If the wheel has been driven for a while with a puncture it can cause cracks.
If you have run flat tyres you can have a crack in your wheel and not know it.
With run flat tyres one crack often produces more cracks as the wheel is unstable
as it is driven about.
We have the capacity to weld repair most damage.
From standard cracks as bellow to replacing missing pieces.
We can prepare your wheels for painting ie: remove curb damage and weld fill any
low spots with aluminium filler wire not body filler!